FilterBagWorks

Dust Collector Accessories & Replacement Parts

FilterBagWorks.com Get Quote
Industrial Baghouse Accessories & Replacement Parts

Dust Collector Accessories & Replacement Parts

Source custom dust collector accessories for baghouse maintenance, filter replacement and system rebuild projects. We supply filter cages, venturis, gaskets, clamps, pulse valves, diaphragm repair kits, tube sheet hardware and related replacement parts for pulse jet, shaker and reverse air dust collectors.

Request Accessories Quote → Send Part Photos / Dimensions
Made to FitCustom by drawing, sample, dimensions or OEM-style part number
Baghouse SupportCages, venturis, gaskets, clamps, valves and hardware
Replacement ReadyFor MRO buyers, distributors, OEM-style projects and plant maintenance
Filter cages, venturis, gaskets, clamps and pulse valve repair parts arranged on an industrial inspection bench
Filter cages, venturis, gaskets, clamps, valves and hardware quoted from real part details.

Product Range

One source for dust collector accessories, filter cage parts and baghouse replacement hardware.

Built for engineers, maintenance managers and industrial buyers who need compatible replacement parts instead of a generic accessories catalog.

01

Filter Bag Cages

Support filter bags in pulse jet baghouses and help maintain stable airflow during filtration and cleaning cycles.

Quote filter cages
02

Venturis for Filter Cages

Guide compressed air into the filter bag during pulse cleaning for longer bags or demanding cleaning conditions.

Quote venturis
03

Gaskets & Sealing Parts

Replacement gaskets, seal felt, tube sheet seals and sealing parts for reducing air or dust leakage.

Send gasket size
04

Clamps, Bands & Hardware

Snap bands, bag clamps, quick release clamps, metal rings, collars, hubs and installation hardware.

Quote clamps
05

Pulse Valves

Pulse valve components, solenoid valves and related pulse jet cleaning parts for collector maintenance.

Quote valve parts
06

Diaphragm Repair Kits

Replacement diaphragms and repair kits for weak pulse cleaning, air leakage or worn pulse valve assemblies.

Send valve label
07

Cage Tops, Bottoms & Collars

Cage top caps, bottom caps, split joints, collars and special cage accessories for repair or fabrication.

Identify cage parts
08

Maintenance Supplies

Leak test supplies, selected hopper hardware and maintenance parts for preventive dust collector service.

Request support

Dust collector accessories for baghouse maintenance and rebuild projects.

We support replacement and custom production for accessories used around filter bags, cages, pulse cleaning systems, sealing points and maintenance hardware.

  • Filter-related partsfilter bag cages, venturis, bag cups, hubs and rings
  • Sealing partsgaskets, seal felt, tube sheet seals and door seals
  • Installation hardwareclamps, snap bands, collars and mounting parts
  • Pulse cleaning partspulse valves, solenoid valves and diaphragm kits
  • Maintenance suppliesleak test supplies and selected service parts

Send these details for a faster accessories quote.

A complete specification reduces back-and-forth and helps confirm fit, material, surface finish and packing method before production.

  • Part Typecage, venturi, gasket, clamp, valve, diaphragm or hardware
  • DimensionsOD / ID, length, thickness, hole size or ring spacing
  • Materialgalvanized steel, carbon steel, stainless, aluminum, rubber, felt
  • Finishgalvanized, epoxy-coated, silicone-coated, painted or untreated
  • Collector Typepulse jet, shaker, reverse air, cartridge collector or bin vent
  • Old Referencedrawing, sample, photo, label or OEM-style part number
Standard Duty

Galvanized Steel

Common choice for standard filter cages, rings and selected hardware in dry industrial dust collection.

Corrosion Review

Stainless Steel 304 / 316

Used where moisture, corrosion or chemical exposure is a concern around cages, clamps or hardware.

Venturi Option

Aluminum

Common for selected venturi designs where lightweight parts and clean pulse airflow are required.

Coated Finish

Epoxy / Silicone Coating

Applied to selected cages or parts when moisture, acid gas or demanding conditions need review.

Sealing

Rubber / Silicone / Felt

Gasket and seal materials are selected by temperature, sealing pressure and chemical exposure.

Custom Duty

Sample-Based Material

When the old part is unclear, a physical sample or detailed photos help confirm replacement material.

Replacement by photo, part number, drawing or sample.

If the original model number is unclear, send photos from multiple angles, dimensions and the application position. We can review compatible replacement options for identification and cross-reference purposes.

  • Old part photosfront, side, close-up, label and installation position
  • Equipment informationcollector type, model or brand style for identification
  • Sample partrecommended for special construction or unclear profiles
  • Compatibility notebrand names are used only for identification purposes
  • Quotation pathsample, trial batch, distributor stock or project order

Specification Guide

Match each accessory to the correct dimensions, material and operating condition.

Use this table to collect RFQ information before sending photos or old part numbers.

AccessoryKey DimensionsMaterial OptionsCommon UseRFQ Priority
Filter Bag CagesSupport framesDiameter, length, wire count, ring spacing, top/bottom styleGalvanized steel, carbon steel, stainless steel, epoxy coatedSupport filter bags in pulse jet collectorsVery High
VenturisPulse airflow guidesTop diameter, throat diameter, height, mounting styleAluminum, carbon steel, stainless steelImprove pulse cleaning airflow into filter bagsHigh
Gaskets & SealsLeakage controlProfile, thickness, width, ID/OD, temperatureRubber, silicone, felt or application-specific materialsReduce air or dust leakage around sealing pointsHigh
Clamps & BandsInstallation hardwareDiameter, band width, locking styleGalvanized steel, stainless steelSecure bags, cages, ducts or access partsMedium-High
Pulse ValvesCleaning system partsValve size, port type, voltage, connection styleBrand-style compatible replacement partsPulse jet cleaning system maintenanceHigh
Diaphragm KitsRepair partsDiaphragm size, valve series, old label photoRubber / compatible repair kit materialRepair worn pulse valve diaphragmsHigh
Cage Tops / BottomsCage componentsCage diameter, cap type, collar and joint designGalvanized steel, carbon steel, stainless steelCage fabrication or repairMedium
Bag Cups / Hubs / RingsBaghouse hardwareDiameter, hole pattern, installation positionMetal or custom materialBaghouse hardware replacementMedium
Timer Boards / ControlsPulse control partsVoltage, output channels, enclosure typeController-dependentPulse cleaning control replacementMedium
Hopper Discharge PartsDust discharge supportInlet/outlet size, equipment model, seal typeApplication-dependentMaintain dust discharge reliabilityMedium

RFQ Workflow

From unclear old parts to confirmed dust collector accessory specifications.

A complete drawing is helpful, but not always required. For many replacement projects, photos, basic measurements and operating conditions are enough to begin a compatibility review.

Identify Part Family

Tell us whether you need cages, venturis, gaskets, clamps, valves, diaphragm kits or hardware.

Send Photos

Provide front, side, top and close-up photos. Include labels for valves or control parts.

Confirm Dimensions

Measure diameter, length, thickness, hole size, wire count, ring spacing or gasket profile.

Review Conditions

Share dust type, temperature, moisture, chemical exposure, abrasion, pressure drop or leakage issue.

Quote & Sample

Confirm material, finish, quantity, packing, sample requirement and production lead time.

How to Identify Replacement Parts

Not sure what accessory you need? Send these details before requesting a quote.

Many plants have older dust collectors with unclear part numbers. Clear photos and basic measurements turn an uncertain maintenance problem into a qualified RFQ.

1
Filter bag cageOutside diameter, length, wire count, ring spacing, top style, bottom cap and venturi requirement.
2
VenturiTop diameter, throat diameter, height, material, mounting position and whether it is welded or removable.
3
GasketCross-section profile, thickness, width, ID/OD, material, temperature and sealing position.
4
Pulse valve / diaphragmValve body photo, label, port size, voltage, diaphragm diameter and connection type.
Measurement reference for filter cage, venturi, gasket, clamp and pulse valve diaphragm parts
Send clear photos with OD, ID, length, thickness, hole size, wire count, ring spacing or label details.

Troubleshooting

Common dust collector problems that may point to accessory replacement.

This diagnostic block helps maintenance buyers understand which part family to quote.

1
Dust leakage after filter replacementCheck gaskets, snap bands, clamps, tube sheet seals, cage fit and bag installation hardware.
2
Filter bags wear or tear too quicklyCheck cage wire damage, rough welds, bent cages, inlet abrasion area and cage finish.
3
Weak pulse cleaning or high pressure dropCheck venturis, pulse valves, diaphragms, solenoids, compressed air lines and timer controls.
4
Corrosion on cages or hardwareReview cage material, surface coating, stainless steel options, moisture and chemical exposure.
5
Gaskets become hard, cracked or compressedReview gasket material, temperature rating, sealing pressure and replacement cycle.
6
Unknown old part numberSend photos, dimensions, equipment model, sample part or application location for replacement review.

Applications

Dust collector accessories for industrial maintenance and replacement programs.

Accessories are selected around dust type, temperature, corrosion risk, cleaning method and the maintenance problem your team is trying to solve.

Cement & LimeCages, venturis, high-temperature hardware WoodworkingFilter support parts, clamps, valves MetalworkingPulse valves, gaskets, clamps Asphalt PlantsHigh-temperature cages and seals Food ProcessingGaskets, stainless hardware, sealing PharmaceuticalFine dust filtration support parts Powder CoatingCartridge-related parts and valves FoundryAbrasion and high-temperature review Chemical ProcessingCorrosion-resistant parts and seals Waste IncinerationHigh-temperature and corrosion review Grain & FeedMaintenance hardware and sealing parts Battery MaterialsFine powder collector maintenance parts

Quality Control

Accessories checked for fit, durability and replacement reliability.

  • Dimension Checkdiameter, length, hole pattern, gasket profile and mounting position
  • Material Verificationgalvanized steel, stainless steel, aluminum, rubber, silicone or felt
  • Surface Finish Reviewgalvanizing, epoxy coating, silicone coating, passivation or paint
  • Welding / Forming Inspectioncage welds, ring spacing, cap shape and joint quality

Export & Distributor Support

Built for maintenance batches, distributor stock and project replacement orders.

  • Fit Compatibilitybag, cage, tube sheet, venturi and sealing position review
  • Sample Confirmationrecommended for first-time replacement projects or unclear parts
  • Packing Protectioncarton, pallet, label and export-ready packing
  • Private Labelavailable for selected distributor or OEM-style programs

Request a Quote

Send your accessory specs for engineering review.

Photos of the old part, installation position and key dimensions are often enough for initial confirmation. Samples or drawings are recommended for special profiles, valves, gaskets or custom cage accessories.

  • Filter cages, venturis, gaskets, clamps, valves and hardware RFQ support
  • Custom by drawing, sample, size or OEM-style part number
  • Material and finish recommendation based on dust collector conditions
  • Sample order, project order and private label packing available

Online RFQ

Upload drawings or part photos with the accessories request. The site form accepts photos, drawings and RFQ files. Email and WhatsApp remain available for large or urgent file sets.

    Online RFQ

    Submit filter specs, photos, and operating details.
    Your request is saved in WordPress, emailed to FilterBagWorks, and can include drawings or photos.






    Prefer files or photos? Submit this form first, then reply to the confirmation email with drawings or send them by WhatsApp.

    Email drawings or photos Send photos on WhatsApp Open full RFQ page

    Include part type, quantity, dimensions, material, collector type, working temperature, old photos, labels, drawings or part numbers.

    FAQ

    Answer buying objections directly on the accessories page.

    What dust collector accessories can you supply?

    We supply filter bag cages, venturis, gaskets, seal felt, clamps, snap bands, pulse valves, diaphragm kits, cage tops, cage bottoms, collars, hubs, rings and selected baghouse replacement hardware.

    Can you make dust collector accessories without an OEM part number?

    Yes. Send photos, dimensions, application position and operating conditions. A physical sample is recommended for special or highly customized parts.

    How do I measure a filter bag cage?

    Measure the outside diameter, overall length, wire count, ring spacing, top style, bottom cap style and whether a venturi is required. Photos from multiple angles help confirm the structure.

    When should venturis be replaced?

    Venturis should be checked when pulse cleaning becomes weak, pressure drop rises, or the venturi is cracked, worn, deformed or missing. Correct venturi fit helps compressed air enter the filter bag during pulse cleaning.

    What materials are available for filter cages?

    Common options include galvanized steel, carbon steel, stainless steel and coated finishes such as epoxy or silicone coating. The selection depends on temperature, moisture, corrosion and dust characteristics.

    Can you supply gaskets and sealing parts?

    Yes. We can quote gaskets, seal felt and sealing-related parts by profile, thickness, width, diameter, material and working temperature.

    Can you supply pulse valve repair parts?

    We can review pulse valves, diaphragm kits, solenoid valves and related cleaning system parts by size, label photo, voltage and connection type.

    Do you support OEM-style replacement parts?

    Yes. We can review parts by dimensions, photos, sample or part number for identification and cross-reference purposes. Brand names are used only to identify compatibility requirements.

    Can I order samples before bulk production?

    Yes. Samples are recommended for first-time custom parts, unclear old accessories, special materials, private label projects or distributor stock programs.

    What information helps you quote faster?

    Part type, dimensions, material, quantity, dust collector type, application, working temperature, old photos, drawings, samples and part numbers help us quote faster and more accurately.

    Related Product Pages

    Connect accessories with filter replacement and maintenance content.

    Use these routes when the accessories request is part of a larger baghouse filter, cage, media or maintenance replacement project.

    Dust Collector Filter Bags Dust Collector Cartridge Filters Filter Cages Baghouse Filters Filter Media Venturis for Filter Cages Dust Collector Gaskets
    Need dust collector accessories?Get Quote
    FilterBagWorks.com · Dust Collector Accessories & Replacement Parts · Brand names and part numbers are used for identification and cross-reference purposes only.